MXW

Microflex®無線麥克風系統為您帶來現代設計和生動逼真的聲音會議室和視音頻會議環境。 該企業級平台包含一個系統先進的會議產品,包括智能可充電麥克風發射器和充電站,謹慎的無線接入點收發器,靈活的音頻網絡接口,以及全面的軟件工具,用於遠程調整和監視系統設置。


MXWANI4 | MXWANI8

Audio Network Interface

Audio network interface streamlines Microflex Wireless connectivity to conference room AV systems over 4/8 channels to enable easy system set-up. Features include corporate uplink mode and Dante networking to transport low-latency digital audio.

產品特色

  • Analog connections: 4 or 8 block connector channel outputs, with 1 or 2 block connector inputs (model dependent)
  • Four port gigabit switch: Optimized port configurations for connection to the Access Point Transceiver and Networked Charging Stations, third party control systems, and corporate networks
  • Ethernet connectivity: Send audio and control signals over long cable runs of up to 300 feet or anywhere over a corporate network
  • Power over Ethernet: Port 1 of the rear panel switch supplies power over Ethernet to the Access Point Transceiver for simplified installation
  • Corporate uplink mode: Link to the corporate network for remote control of system settings while keeping audio off the network for security and to reduce bandwidth
  • Front panel controls: Mute or solo channels and set input/output levels easily from the front panel
  • PC/Mac software control: Access the Microflex Wireless Control Software from a networked computer for input/output levels and port configuration
  • Dante™ networking: Transports low latency digital audio received from wireless microphones over Ethernet to any other Dante-equipped device
  • Headphone output: Solo audio signal on any channel

MXWAPT2 | MXWAPT4 | MXWAPT8

Access Point Transceiver

The MXWAPT is a 2- 4- or 8-channel wireless access point compatible with Microflex® Wireless microphone systems. It uses automated frequency coordination to assign clean frequencies to wireless microphones and manages two-way wireless transmission of encrypted audio and control signals. Power to the unit (via PoE) and Dante digital networked audio are both supplied over a single Ethernet cable to simplify installation, and the supplied mounting plate and paintable cover allow discreet placement in boardrooms and conference rooms where low visibility is preferred.

產品特色

  • Slim profile: Lightweight, discreet unit with paintable cover to match interior room colors and blend into AV environments
  • Easy installation: Includes wall/ceiling mounting plate and connects to the system over single Ethernet cable (PoE compatible)
  • Plenum rated: Meets rigorous fire safety test standards for installation above drop ceiling tiles
  • Scalable configurations: Available in 2, 4 or 8 channel models to fit varying channel count requirements, and multiple unit can be combined support configurations of up to 40 compatible channels (80 in Europe and select countries)
  • Bi-directional wireless: Provides return channel audio to wireless transmitters and enables real time remote control of all wireless microphone settings
  • Automated frequency coordination: Automatically scans available spectrum, coordinates clean frequency assignments,and moves channels away from unexpected interference
  • Dante™ and AES67 digital networked audio: Transports low latency digital audio received from wireless microphones over Cat5e cable to any other Dante-equipped device
  • Encrypted wireless: AES 256-bit encryption for secure transmission
  • Selectable output power: Optimize spectrum usage by selecting the appropriate wireless output power for the desired operating range
  • Diagnostic LEDs: Provide easy visual reference to system activity and indicate power, wireless connection, and network audio status.

MXW2

HANDHELD TRANSMITTER

The MXW2 is a handheld transmitter compatible with Microflex® Wireless Systems. With lightweight but durable construction and integrated diversity antennas, the MXW2 delivers vivid lifelike sound, intelligent wireless performance, encrypted transmission, and advanced rechargeability for presentation and conferencing applications. Available with trusted Shure microphone cartridges, including the legendary SM58®.

產品特色

  • Interchangeable microphone cartridges: Available with the SM58®, SM86, Beta® 58A and VP68 signature Shure microphones
  • Dual transmit antennas: Maximizes transmission strength depending on hand placement
  • Bi-directional wireless: Enables real time remote control of all wireless microphone settings
  • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control.
  • Standby mode: Enabled remotely during breaks or periods of inactivity to significantly extend battery life when not in use.
  • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
  • Range warning alert: Emits beeping sound when range limit is exceeded
  • Easy transmitter linking: Assign the microphone to an Access Point channel by simply docking it into a Networked Charging Station and pressing “link”
  • Encrypted wireless: AES 256-bit encryption for secure transmission.
  • Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 15 hours of continuous use, charge to full in 3 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
  • USB charging: Connects to any standard USB power source for “always on” usage.

MXW8

GOOSENECK BASE TRANSMITTER


The MXW8 is a gooseneck base transmitter compatible with Microflex® Wireless Systems. With a stylish, contoured design and minimal footprint it complements any conference setting. The MXW8 accepts Microflex gooseneck microphones available in multiple lengths with polar pattern and LED options. All Microflex Wireless transmitters deliver pristine audio quality, intelligent wireless performance, encrypted transmission, and advanced rechargeability for conferencing and presentation applications.

產品特色

  • Gooseneck options: Compatible with a wide variety of length, LED light ring, and polar pattern variations of Microflex Gooseneck Microphones
  • Color options: Available in black or white
  • Wide frequency response: Full range audio for clear voice transmission
  • Concealed power switch: Prevents accidental powering off
  • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings including light ring indication
  • Earphone output: Listen to audio from a return channel for translation, cueing, or program material
  • Programmable mute button: Customize local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control
  • Encrypted wireless: AES 256-bit encryption for secure wireless transmission
  • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
  • Out of range alert: Emits beeping sound when range limit is exceeded
  • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing “link”
  • Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
  • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use
  • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining
  • USB charging: Connects to any standard USB power source for “always on” usage.

MXW6

BOUNDARY TRANSMITTER


The Shure MXW6 is a boundary microphone transmitter compatible with Microflex® Wireless Systems. With a low-profile design and cardioid or omnidirectional polar pattern options, the MXW6 allows flexible placement with excellent audio capture on any surface in front of one or multiple speakers. All Microflex Wireless transmitters deliver pristine audio quality,intelligent wireless performance, encrypted transmission, and advanced rechargeability for conferencing and presentation applications.

產品特色

  • Coverage options: Available in cardioid or omnidirectional polar patterns
  • Color options: available in black or white
  • Wide frequency response: Full range audio for clear voice transmission
  • Microflex capsules: Well known and trusted Microflex sound signature
  • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings
  • Earphone output: Listen to audio from a return channel for translation, cueing, or program material
  • Concealed power switch: Prevents accidental powering off
  • Programmable mute button: Customize local or remote muting behavior per application, with options including push-totalk, push-to-mute, and external control
  • Encrypted wireless: AES 256-bit encryption for secure transmission
  • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
  • Out of range alert: Emits beeping sound when range limit is exceeded
  • Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing “link”
  • Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
  • Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use
  • Low-battery LED: Visually alerts when there is 30 minutes of charge remaining
  • USB charging: Connects to any standard USB power source for “always on” usage.

MXW1

BODYPACK TRANSMITTER


The MXW1 is a hybrid bodypack transmitter compatible with Microflex® Wireless systems. It offers both an integrated omnidirectional microphone and an input jack for connecting an ear-worn or lavalier style microphone. The integrated microphone is perfect for picking up speech while the bodypack is on a lanyard or tucked into a shirt pocket, and a belt clip is included for attachment to clothing.

產品特色

  • Compact, low-profile design: Fits comfortably into a shirt pocket or attached to clothing
  • Integrated omnidirectional mic: Clearly captures full range audio without connecting an external microphone
  • External microphone input: For connecting multiple styles of ear-worn or lavalier condenser microphones
  • Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings
  • Earphone output: Listen to audio from a return channel for translation, cueing, or program material
  • Programmable mute button: Customize local or remote muting behavior per application, with options including push-totalk, push-to-mute, and external control.
  • Standby mode: Enabled remotely during breaks or periods of inactivity to significantly extend battery life when not in use
  • Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
  • Out of range alert: Emits beeping sound when range limit is exceeded
  • Wide frequency response: Captures full range audio for clear voice transmission
  • Easy transmitter linking: Assign the microphone to an Access Point channel by simply docking it into a Networked Charging Station and pressing “link”
  • Encrypted wireless: AES 256-bit encryption for secure transmission.
  • Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
  • USB charging: Connects to any standard USB power source for “always on” usage.

MXWNCS2 | MXWNCS4 | MXWNCS8

NETWORKED CHARGING STATION


The MXWNCS is a 2, 4 or 8 port Networked Charging Station compatible with Microflex® Wireless microphone systems. Designed to complement boardroom aesthetics, Networked Charging Stations easily connect between conference room credenzas and AV rack closets over Ethernet via a single Cat5e cable. The front panel displays battery charge in 5 segment LED’s, and remaining runtime and charge levels in hours and minutes can be monitored from any networked computer via the control software. Handheld, bodypack and boundary transmitter styles each occupy one docking space while gooseneck bases require two spaces to dock.

產品特色

  • Versatile microphone docking: Each station accepts all Microflex Wireless transmitters
  • Charge status indicators: 5-segment LED’s on the unit display charge status individually for every docked microphone
  • Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems
  • Easy transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing “link”
  • Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours